Solar Water Tank-Indirect-Two Coil
★ GMO indirect solar water tank two coil family is from 100 Liter to 500 Liter. You can find the different liter solar water tank for your indirect solar water heater system.
★ Enamel-coating steel heat exchanger is with large heat exchange area, high efficiency, and long life. One coil for solar, the other coil for gas.
★ Environment-friendly 50 mm thickness insulation ensure its very low heat loss and high hot water output.
★ The water heater meet the drinking water standard.
★ Top quality parts: Incoloy 840 heat element, Emerson 89T or 59T66T thermostat, Watts T/P Valve.
★ WaterMark, CE Certificate
High Efficiency Heat Exchanger
The enamel coating heat exchanger is made from steel pipe. Outside surface is coated by enamel. The heat exchanger is with very large heat exchanger area. It is high efficiency, low cost and no leakage.
Very Low Heat Loss Value
GMO use pressurized insulation for the water heater. The density is about 40 Kilogram/m³. So the water heater can be high efficiency, low heat loss and energy saving.
Blue Diamond Coating
GMO enamel coating is made from the American Ferro enamel powder. The enamel coating meet drinking water stand. Enamel solubility reach Y class. It can resist against 85℃ hot water.
Stronger Anode Rod
GMO stronger anode rod can perfectly protect the inner tank of the water heater against the corrosion, and ensure the even longer life of water heater.
High Efficiency Enamel Coating Heat Exchanger
GMO developed the enamel coating heat exchanger for solar water tanks. The heat exchanger is enamel coating, which can protect the heat exchanger from corrosion. Its advantage is low cost, high efficiency, safe, no leakage, life, and meeting drinking water standard.
How Indirect Solar Water Heater System Works
Indirect solar water heater is combined with indirect solar water tanks, working station, and solar collectors. The pump inside the working station force the glycol in the close circuit system to circulate in the system. When the glycol go through the collectors, it will be heated by the collectors, and become hot, then return to the heat exchanger in the solar water tank. The heat energy will be transferred from the heat exchanger to the water in the tank. In this way, the water in the tank will gradually become hot. There will be a heat element in the middle of the tank. When the sunshine is not good, the heat element can work and heat the water. The top coil is connected to the gas booster. When the sun shine is not good, the gas booster can provide the instant hot water immediately.
High Quality Enamel
Best Material and Parts
Indirect Solar Water Tank Two Coil Structure
Water Heater Specification
|Upper Heat Exchanger Area (㎡)||1||1||1.2||1.2|
|Lower Heat Exchanger Area (㎡)||1||1.5||1.7||1.7|
|Temperature Setting Range (℃)||49-82||49-82||49-82||49-82|
|Default Temperature (℃)||65±5||65±5||65±5||65±5|
|Insulation Thickness (mm)||50||50||50||50|
|Power Choice (kw)||1.5/2/2.5/3/4/5||1.5/2/2.5/3/4/5||1.5/2/2.5/3/4/5||1.5/2/2.5/3/4/5|
Solar Water Tank Catalogue Download
Welcome to send us message